Table of Contents
Advertisement
Menu
Item
HDMI1 / 3 Input
Reset Sound Defaults
Off Timer
Favourites Edit
Channel List
Auto Tuning
Manual Tuning
Update Channel List
New Channel
Message
Signal Condition
Add MPEG-4
AVC Channels
Teletext
Side Panel
Input Labels
Banner Display
Timeout
Playing Time Display
VIERA Link
Power on Link
Power off Link
Standby Power Save
Intelligent Auto
Standby
Shipping Condition
System Update
Software Licence
System Information
Power Save
Picture Overscan
Region Select
Daylight Saving
Time
Refresh Rate
●
A different menu will be displayed while PC, DVI to HDMI adapter cable or SD Card is used. (p. 33 - 37)
●
Only available items can be selected.
Adjustments / Configurations (alternatives)
Select to fit the input signal (Digital / Analogue) (p. 48)
Digital: HDMI cable connection
Analogue: HDMI-DVI adapter cable connection
●
HDMI input mode only
●
HDMI2 terminal is for digital signal only
●
No setting for HDMI2 available
Press the OK button to reset the present Sound Menu to the default settings
Sets the time the TV automatically turns Off (Off / 15 / 30 / 45 / 60 / 75 / 90 minutes) (p. 15)
Creates list of favourite channels (Digital TV mode) (p. 29)
Skips the unwanted channels (p. 29)
Sets all Digital TV or Analogue TV channels automatically (p. 30)
Sets the TV channels manually (p. 31)
Update the channel list (Digital TV mode) (p. 31)
Displays a message when new Digital TV channels are found. (Off / On) (p. 31)
Checks the Digital TV signal condition (p. 31)
Activates the reception of MPEG-2 and MPEG-4 AVC channels
●
Use this function if MPEG-4 AVC services start in your area.
●
All previous tuning settings are erased.
●
Once activated, this option is removed from the Digital TV Tuning Menu.
Teletext display mode (TOP (FASTEXT) / List) (p. 18)
Increases the brightness of the side panel (Off / Low / Mid / High)
●
The recommended setting is "High" to prevent panel "image retention".
Labels or skips each input mode (p. 26)
Sets how long the information banner stays on screen from 0 (No display) to 10 sec. in
1-sec. increments
Displays the length of time in every thirty minutes for playing game (Off / On)
●
When "Viewing Mode" is set to "Game"
Sets to use VIERA Link functions (Off / On)
●
VIERA Link functions become available when "VIERA Link" is set to "On".
Sets to use Power on Link functions (Off / On) (p. 39)
Sets to use Power off Link functions (Off / On) (p. 39)
Controls the power consumption in Standby mode of the connected equipment to
reduce the consumption (Off / On) (p. 39)
Makes unwatched or unused connected equipment go into Standby mode to reduce the
power consumption (Off / On (With reminder) / On (No reminder)) (p. 39)
Resets all settings, for example, when moving house (p. 32)
Downloads new software to TV (p. 27)
Displays the software licence information
Displays the system information of this TV
Reduces brightness of picture to minimise power consumption (Off / On)
Selects the screen area for displaying the image (Off / On)
On: Enlarges the image to hide the edge of the image.
Off: Displays the image in the original size.
●
Set to "On" if noise is generated on the edges of the image.
●
This function is available when aspect is set to "16:9".
●
This function can be memorized separately for SD (Standard Definition) and HD (High
Definition) signals.
Selects the region where you live to adjust the standard time (NSW / ACT / Victoria /
Queensland / South Australia / Western Australia / Northern Territory / Tasmania) (p. 15)
Select time offset from the standard time for Summer Time
(Auto / Off / +1/2 hour / +1 hour) (p. 15)
●
Set to "Auto" normally
Changes the image processing of the panel (depending on the input signal) (50Hz / 100Hz)
●
Set to "100Hz" normally
25
Hide quick links:
Advertisement
Table of Contents
