Timer Programming - Panasonic Viera TH-P55ST30A Operating Instructions Manual

Timer Programming

Timer Programming from Menu
The Timer Programming menu allows you to choose programmes that you wish to remind watching or
record to the USB HDD / SD Card. At the correct time, the TV will tune to the correct channel even if the
TV is in Standby mode.
TV Guide may also be used to set timer programming event (p. 22).
•
This function is not available in Analogue mode.
•
Timer Programming can store up to 15 events.
•
Timer Programming only works reliably if correct time information is received via the signal from the
broadcaster or service provider.
•
For recording using Timer Programming, the TV must be either On or in standby. For reminders to be
displayed, the TV must be On.
•
No other channel can be selected while the recording of Timer Programming is in progress.
•
It may not be possible to record an encrypted programme (which is copy-protected).
•
When recording programmes to the USB HDD, be sure to format the USB HDD and enable it for
recording in [Recording Setup] (p. 52).
•
When recording programmes to the SD Card, prepare the SD Card without any data.
•
2 minutes before the starting time, a reminder message appears if you are watching TV.
• To remove the message and start the
programming
POWER
INPUT
SD CARD
TV AV
MENU ASPECT
INFO
EXIT
OPTION RETURN
R G Y B
TEXT STTL INDEX HOLD
abc def
ghi jk l mno
pqrs tuv wxyz
MUTE LAST VIEW
VOL CH
POWER CH
■
To return to TV
EXIT
■
To unlock the
tuner and stop
recording
EXIT
Preparations:
1
Select Digital TV
mode
TV
Select [Timer Programming]
Timer Programming Access
Off Timer Off
Auto Standby Off
• To cancel the programming
EXIT
2
Display the menu
MENU
select
access
3
Select [Timer]
45