User Maintenance; Personal Safety - easybike G3 User Manual

if the air pressure less then 40psi the battery will work much harder , the range will
be shorter and the life of the battery will be much shorter.
replace the tire if need.

USER MAINTENANCE *

7.
Many parts on your E-SCOOTER are subject to a higher degree of wear due to
their function and depending on their use.
Have your E-SCOOTER checked regularly at a professional e-bike shop and have
any worn parts replaced.
After an accident or crash you must take your E-SCOOTER to a bike repair
specialist to make sure that it is safe to ride. Be aware that damage may not be
visible. Failure to do this may result in serious injury.
Any form of crack, scratches or change of colouring in highly stressed areas
indicate
that the life expectancy of the part has been reached and it should be
replaced immediately. Ensure the battery is removed from the bike before
carrying out any maintenance. Make sure that all screws and bolts are tightened
securely and to the prescribed tightening torques before riding. You must always
use genuine replacement
parts when performing maintenance on your E-SCOOTER.
Regularly check the tyre pressures minimum 35psi, maximum 45psi and regularly
check the tread depth of tyres.

Personal Safety:

• This e-scooter is intended for use as a commuter and leisure e-scooter.
Using the e-scooter for any
other purpose may result in serious injury.
• Before you ride this e-scooter in a busy area or on
public roads, practice riding in a safe area free
from hazards. Take time to learn the e-scooter's
controls and power.
• It is your responsibility to identify and follow all
local laws and regulations, including fitting your
e-scooter with any additional equipment necessary
to comply with local laws.
• Observe the applicable traffic regulations.
• At night your e-scooter MUST have white front and
page
9
www . easybike - int . com