Setup; Program Ch - Panasonic TH-37PX25 Operating Instructions Manual

Menu Navigation

Setup

CH
OK
VOL VOL
CH

Program CH

Input Setup
Lets you specify the antenna mode (Cable only, Cable/Antenna or Antenna only).
1
CH
VOL OK VOL
CH
2
CH
VOL OK VOL
CH
3
CH
VOL OK VOL
CH
Notes:
• Auto scan is necessary when you select the input signal for the first time or whenever you change the antenna configuration.
• If CableCARD is not inserted, the Auto scan performs Scan All.
• When CableCARD is inserted and Cable only is selected, Auto Scan will be skipped.
• When CableCARD is inserted and Cable/Antenna is selected, Antenna (B) Analog & Digital Auto Scan will be performed.
• In order to manually select Antenna B from the remote, Auto Scan must first be performed.
36
Press to select the menu.
Press to display the sub-menu.
Press to select Input Setup.
Press to enter the sub-menu field.
Press to select the antenna mode.
Press to enter your selection.
• The confirmation message appears.
Press to start Auto Scan.
Program Channel
Input Setup Setting Cable/Antenna
Auto Scan
Manual Program
Signal Meter