Disassembly - Pioneer PDP-V402 Service Manual

7.1.3 DISASSEMBLY

Rear Cover Section
1. Remove the screw 1 tightening the FAN RELAY ASSY.
2. Disconnect the connector 2 from the FAN RELAY ASSY.
3. Remove the fourteen hole rivets 3 and twenty-four screws 4,
and remove the rear cover from the front case.
4
4
3
4
Note:
When opening the rear cover, open the PCB cover at the bottom
of the rear fan, disconnect the connector CN58012 of the FAN
RELAY ASSY, and then open the rear cover. Opening it
directly may break the wire.
As the P.D. circuit starts operating when CN5801 is removed,
short between TP3802 and TP3803 using a alligator clip to stop
the P.D. circuit operation.
3
4
3
4
4
3
4
2
4
TP3803
TP3802
CN5801
PDP-V402
3
4
1
157