Pioneer PDP-V402 Service Manual page 98

PDP-V402
Chassis Section
1. Remove the three screws 5 tightening the INLET PANEL.
2. Remove the INPUT CONTROL ASSY from the PCB spacer 6.
3. Move the whole INPUT CONTROL ASSY to move INLET PANEL to the
position where the screws 7 fixing the chassis can be removed.
4. Remove the four front shield 8.
5. Remove the twenty-two screws 7 fixing the chassis.
6. Pull out the chassis block (chassis, panel, PCB ASSY) from the front case.
7
×6
8
Front Shield
158
5
×3
INPUT CONTROL ASSY
7
×5
6
PCB
Spacer
6
PCB
Spacer
7
×6
7
×5