Panel Facilities And Specifications - Pioneer PDP-V402 Service Manual

8. PANEL FACILITIES AND SPECIFICATIONS

PANEL FACILITIES
<Rear Panel Terminals/Connections to Power Source>
7 8 9
OFF ON OFF ON
RGB-2
REMOTE G ON SYNC
<Control Panel>
1 STANDBY/ON indicator
The indicator is red when in standby mode and turns green
when the power to the display is turned on.
2 POWER button
Press to turn the power to the display on and off.
3 INPUT button
Press to switch the various input functions.
4 MENU button
Press to enter the menu screen and exit from it.
5 ADJUST button
Use the +/– buttons to adjust picture quality.
6 SET button
Press to finalize menu selections when adjusting picture qual-
ity.
<Rear Panel Terminals/Connections to Power Source>
RGB-2 input terminals
7 Remote control out switch (ON/OFF)
This switch will output remote control commands
from the RGB-2 (D-SUB 15-pin) terminal to control
external peripheral devices planned for future sales
release. Nor
mally be sure to use set to OFF .
8 MINI D-SUB 15-pin terminal
9 G on Sync mode selection switch (ON/OFF)
If the images become greenish when an external
device is connected to the RGB-2 input terminal,
turn ON the G on SYNC mode. Normally set to OFF .
0 - = ~ ! @ #
VD HD B G R C
75 (Ω) 2.2k
(H/V SYNC) RGB-1 (ON SYNC)
SYNC
<Control Panel>
STANDBY
/ON
1
2
INPUT
3
MENU
4
ADJUST
5
SET
6
$ % ^ &
Y OUT IN
Y/C VIDEO RS-232C
RGB-1 input terminals
0 Sync Signal Input Impedance switch (75 Ω/2.2 kΩ)
- Vertical Sync Signal Input terminal: (75 Ω/2.2 kΩ,
switchable with the Sync Signal Input Impedance
switch)
= Horizontal or Composite Sync Signal Input termi-
nal: (75 Ω/2.2 kΩ, switchable with the Sync Signal
Input Impedance switch)
~ Blue Signal Input terminal: 75 Ω
! Green or Green with Sync Signal Input terminal
(ON SYNC): 75 Ω
@ Red Signal Input terminal: 75 Ω
Y/C input terminals
# Color Signal Input terminal: 75 Ω
$ Luminance Signal Input terminal: 75 Ω
VIDEO input/output terminals
% Video Output terminal: 75 Ω
^ Video Input terminal: 75 Ω
& Control Signal Input terminal (RS-232C)
* AC inlet
( MAIN POWER switch
Use to -turn the power off from the display when it will not
be operated for a long time.
PDP-V402
* (
169