Screensaver; (For Preventing Image Retention); Setup Of Screensaver Time - Panasonic TH-37PR11UH Operating Instructions Manual

SCREENSAVER

Do not display a still picture, especially in 4:3 mode, for any length of time.
If the display must remain on, a SCREENSAVER should be used.
1
2
3 FUNCTION selection
4
MODE selection
5
START setting

Setup of SCREENSAVER Time

After selecting TIME OF DAY or INTERVAL, the relevant Time Setup will become available for selection and the Operating
Time may be set. (Time cannot be set when "MODE" is "ON" or "OFF".)
Notes:
• Pressing " " or " " button once changes the Time 1 minute.
[However, switching occurs every 15 minutes when Periodic Time is selected.]
• Pressing " " or " " button continuously changes the Time by 15 minutes.
Note: Timer function will not work unless "PRESENT TIME OF DAY" is set.
26

(For preventing image retention)

Press to display the SET UP menu.
Press to select the SCREENSAVER.
Press to select the SCREENSAVER screen.
Press to select the FUNCTION.
Press to select the desired function.
NEGATIVE IMAGE
WHITE SCREEN OVERLAY SCROLLING BAR
NEGATIVE IMAGE
SCROLLING BAR ONLY : A white bar will scroll from left to right. The image won't be displayed.
OVERLAY SCROLLING BAR : The brightness of the image will be decreased and a white bar will scroll on it.
WHITE SCREEN
Note: OVERLAY SCROLLING BAR is not effective during two screen display.
Press to select the
MODE.
Press to select each
mode items.
When the MODE is set to ON, press to select START.
Press to start SCREENSAVER.
The menu screen will disappear and the SCREENSAVER will be activated. To stop the
SCREENSAVER under ON, press the R button or any buttons on the main unit.
Note: When the display is turned off, the SCREENSAVER will be deactivated.
Press to select START TIME / FINISH TIME (When TIME OF
DAY is selected).
Press to select SHOW DURATION / SAVER DURATION (When
INTERVAL is selected).
Press to setup.
button: Forward
button: Back
SCROLLING BAR ONLY
: A negative image will be displayed on the screen.
: The whole screen will be white.
Off
INTERVAL : Operates when SHOW DURATION and SAVER
DURATION are set up and those times arrive.
TIME OF DAY : Operates when START TIME and FINISH TIME are
set up and those times arrive.
ON : Operates when START is selected and the ACTION
( ) button is pressed.
SET UP 1/2
SIGNAL
SCREENSAVER
COMPONENT/RGB-IN SELECT
RGB
PC
INPUT LABEL
POWER SAVE OFF
STANDBY SAVE OFF
POWER MANAGEMENT
OFF
AUTO POWER OFF OFF
ENGLISH ( US )
OSD LANGUAGE
SCREENSAVER
PRESENT TIME OF DAY 99:99
START
FUNCTION SCROLLING BAR ONLY
OFF
MODE
START TIME 6:15
FINISH TIME 12:30
BRIGHT
SIDE BAR ADJUST
WOBBLING OFF
PEAK LIMIT OFF
SCREENSAVER
PRESENT TIME OF DAY 15:00
START
FUNCTION SCROLLING BAR ONLY
TIME OF DAY
MODE
6:15
START TIME
FINISH TIME 12:30
SCREENSAVER
PRESENT TIME OF DAY 15:00
START
SCROLLING BAR ONLY
FUNCTION
INTERVAL
MODE
12:00
SHOW DURATION
SAVER DURATION 3:00