Table of Contents
Advertisement
Operating Instruction
If in the setting status, in 1 minute no press "+ -ok/esc"
will exit alarm to "00:00" or press"ok/esc" keep in 3s
in setting status, can cancel the alarm function.
Self cleaning function: When the hood is used for a
certain time, the self cleaning function icon on the
display will flash. It indicates the self cleaning function
should be activated. Any other functions except light
and linkage function should be closed, then press the
"ok/esc" button to start the self-cleaning function.
As the down-counter is shown on right-up corner of
the display. The self cleaning function will keep
running for about 30 minutes. When finished, the
display will automatically close. During self cleaning,
a long-time press on the "ok/esc" button for about 3
seconds will shop self cleaning function ahead of time.
If the self cleaning lasts less than 10 minutes and is
shut off, the "
" Icon may flash which reminds of
another self cleaning. When "
" icon is flashing,
users could press "
" button for 3 seconds to
cancel the reminding compulsively. During self
cleaning, all buttons will not work except the following
buttons- "
" "
" and "ok/esc".
When the displayer doesn't show the self cleaning
icon and any other functions except light are off,press
"
" for 3 times till the "
" icon flashes. Press
"ok/esc" button again to activate the self cleaning
function with the "
" icon on.If this operation is not
finished in one minute,it will exit the menu
mode.During self cleaning,a long-time press on the
"ok/esc" button for about 3 seconds will halt the self
cleaning function ahead of time.
Attentions:Before self cleaning,clean the grease
collector in case of grease spilling. During self
cleaning, keep an eye on the spot in case of
unexpected problems.
Remarks: please clean up the pil collector, every time
before self cleaning, to prevent overflowing.
During self cleaning,please don't move away, to
prevent dengerous case.
Ventilation function:when blower is not working
status,press "
" till "
" flash, press "ok/esc"
enter the ventilation function.Show "
" , the fan
will running for 5 minutes in every hour. During the 5
minutes the display will shows the symbol"
".
7
Advertisement
Table of Contents
