Table of Contents
Advertisement
Installation Instruction
Installation of Fasteners
11
Determine the installation positions of the fasteners
(fixing brackets and mounting rails) on the wall and
follow steps indicated in photo below. If the adjustable
cover is not needed, skip step 5.
Draw a line on the wall from the ceiling to the lower
edge of the hood at the centre of the location where
the hood is going to be mounted.
After determining installation positions of the
fasteners on the wall, use a driller with a diameter of
10 mm to drill holes in the wall.
Insert the accessory wall plug into the drilling holes
and fix the fasteners (fixing brackets and mounting
rails) onto the wall with the accessory fixing screws.
Product Model
Dimension B (mm)
45mm
347mm
120mm
220mm
B
Note:
The lower edge of dimension B is the bottom point of
cooker hood (Oil collector is not included).
LC38S953..
485
Fixing
Brackets
Advertisement
Table of Contents
