Traffic-Priority - Huawei Quidway S6500 Series Command Manual

Command Manual - QoS/ACL
Quidway S6500 Series Ethernet Switches
Example
# Perform traffic limitation to packets that match with the permit rule of ACL 2000. The
normal traffic is 128 kbps.
[Quidway-qoss-Ethernet3/0/1] traffic-limit inbound ip-group 2000 128

2.1.24 traffic-priority

Syntax
I. The Command Line Format for for A type Card
traffic-priority { inbound | outbound } { ip-group { acl-number | acl-name } [ rule rule ]
| link-group { acl-number | acl-name } [ rule rule ] } { { dscp dscp-value |
ip-precedence pre-value } | local-precedence pre-value }*
undo traffic-priority { inbound | outbound } { ip-group { acl-number | acl-name }
[ rule rule ] | link-group { acl-number | acl-name } [ rule rule ] }
Note:
A type card includes LS81FT48A, LS81FM24A, LS81FS24A, LS81GB8UA and
LS81GT8UA cards.
II. The Command Line Format for the Cards except A Type Ones
traffic-priority inbound { user-group { acl-number | acl-name } [ rule rule ] |
{ ip-group { acl-number | acl-name } [ rule rule ] | link-group { acl-number | acl-name }
[ rule rule ] }* } { { dscp dscp-value | ip-precedence pre-value } | { cos cos |
local-precedence pre-value } }*
undo traffic-priority inbound { user-group { acl-number | acl-name } [ rule rule ] |
{ ip-group { acl-number | acl-name } [ rule rule ] | link-group { acl-number | acl-name }
[ rule rule ] }* }
Huawei Technologies Proprietary
2-31
Chapter 2 Qos Command