Formatting A Memory Card - Olympus CAMEDIA E-10 Instructions Manual

Formatting a Memory Card

Memory cards which have been formatted on a computer or other external device, or
cards of another manufacturer, may have a different format. Such cards should be
formatted before they are used with the camera. Formatting a used card deletes all the
images stored on the card, so you should frequently copy images to a computer where
they can be stored safely. A SmartMedia card protected by an attached protect seal
cannot be formatted.
Mode dial set to P, A, S, or M
6
Mode dial set to playback
5
152
Downloaded From camera-usermanual.com
OFF
2
ON
6
1
Insert the card that you want to
format into the camera. (
2
Check the control panel display
3
and make sure that the mark for
the card that you want to format,
SmartMedia
, is displayed.
If the mark is not displayed, press and
hold down the SM/CF memory card
button, and then turn the main dial or sub
dial until it is displayed.
4
3
Set the mode dial to P, A, S, M, or
to playback
4
Press the menu button
The menu opens in the monitor.
5
If you set the mode dial to
7
playback
press
highlight to card setup
6
On the arrow pad, press
move the green highlight to the
format mark
7
Press the
FORMAT? is displayed.
7
30)
or CompactFlash
.
.
, on the arrow pad
or to move the green
.
to
.
button.