Installation Procedure - Panasonic ty-cc10w Service Manual

2.2. VIERA Communication Camera Testing Software (QTCam) Installation
Procedure
2.2.1.

Installation Procedure

(1) Copy the downloaded
[QTCamFullSetup_20100615.exe] to the personal computer
where you will do the testing and run it.
(double-click on [QTCamFullSetup_20100615.exe])
(2) Activate QTCam Setup: Installation Options and select the
software you wish to install.
Select [FFDShow Codec].
(FFDShow is required to play H.264 videos)
(3) Click [Next].
(4) Specify the folder to install the program in and click [Install].
(You do not have to change the folder)
Installation will begin.
(5) Installation begins.
Installation of FFDShow occurs next.
4
installation software