Panasonic ty-cc10w Service Manual page 14

2.3. VIERA Communication Camera Testing Software (QTCam) Settings and
Testing Procedures
2.3.1. Connecting the VIERA Communication Camera
(1) Activate the QTCam program by double-clicking on the
shortcut icon.
"QTCam" window will open in your personal computer.
(2) Connect the VIERA Communication Camera (TY-CC10W)
you wish to test into your computer's USB slot.
(3) Click [Devices]. If [TY-CC10] is displayed, the camera has
been recognized.
If TY-CC10 is not displayed:
• Disconnect and connect the camera into the USB slot and
check whether the computer recognizes it.
• If [TY-CC10] does not appear after several attempts at
reconnecting the camera, the camera itself may be at fault.
9