Specifications - Kenwood KR-V8090 Service Manual

AUDIO section
Rated power output during STEREO operation
(1070VR)
120 watts per channel minimum RMS, both channels
driven, at 8 Ω from 20 Hz to 20 kHz with no more than
0.06 % total harmonic distortion.(FTC)
(1060VR)
110 watts per channel minimum RMS, both channels
driven, at 8 Ω from 20 Hz to 20 kHz with no more than
0.06 % total harmonic distortion.(FTC)
Rated power output during SURROUND operation
(1070VR)
FRONT
(1kHz, 0.7% T.H.D. at 8 Ω) ......................120 W + 120 W
CENTER
(1kHz, 0.7% T.H.D. at 8 Ω).....................................120 W
SURROUND
(1kHz, 0.7% T.H.D. at 8 Ω) ..........................60 W + 60 W
(1060VR)
FRONT
(1kHz, 0.7% T.H.D. at 8 Ω) ......................110 W + 110 W
CENTER
(1kHz, 0.7% T.H.D. at 8 Ω).....................................110 W
SURROUND
(1kHz, 0.7% T.H.D. at 8 Ω).....................................110 W
Total harmonic distortion
(1070VR)..................................0.015%(1 kHz, 60W, 8 Ω)
(1060VR)..................................0.015%(1 kHz, 55W, 8 Ω)
Frequency response
CD .....................................5 Hz ~ 85 kHz, +0.5 dB, -3 dB
Signal to noise ratio (IHF'66)
PHONO (MM) ..........................................................75 dB
CD............................................................................95 dB
Input sensitivity / impedance
PHONO (MM)............................................2.5 mV / 47 kΩ
CD ............................................................200 mV / 47 kΩ
ADAPTOR IN ...........................................400 mV / 10 kΩ
Output level / impedance
TAPE REC .................................................200 mV / 1 kΩ
ADAPTOR OUT .........................................200 mV / 1 kΩ
PRE OUT (CENTER, SURROUND) ...............1 V / 600 Ω
PRE OUT (SUBWOOFER) ...............................1 V / 1 kΩ
Tone control
BASS ....................................................±8 dB (at 100 Hz)
TREBLE ................................................±8 dB (at 10 kHz)
LOUDNESS control
VOLUME at -40dB level....+7 dB(100 Hz), +3 dB(10 kHz)
KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without
Notes
notice.
1060VR/1070VR/KR-V8090/KR-V9090

SPECIFICATIONS

VIDEO section
VIDEO inputs / outputs
VIDEO (composite)......................................1 Vp-p / 75 Ω
FM tuner section
Tuning frequency range ........................87,5 MHz ~ 108 MHz
Usable sensitivity (MONO)
........1.6uV (75 Ω)/15.2 dBf (75 kHz DEV., SINAD 30 dB)
50dB quieting sensitivity
STEREO ......................................31.6uV (75 Ω)/41.2 dBf
Total harmonic distortion (1 kHz)
(for U.S.A. and Canada)
MONO ...............................................0.2 % (65 dBf input)
STEREO............................................0.5 % (65 dBf input)
(except for U.S.A. and Canada)
MONO ...............................................0.6 % (65 dBf input)
STEREO............................................0.7 % (65 dBf input)
Signal to noise ratio (1 kHz, 75 kHz DEV.)
MONO ...............................................75 dB (65 dBf input)
STEREO ...........................................68 dB (65 dBf input)
Stereo separation (1 kHz) .............................................40 dB
Selectivity (±400 kHz)
(for U.S.A. and Canada) .........................................70 dB
(except for U.S.A. and Canada)..............................50 dB
Frequency response ..........30 Hz ~ 15kHz,+0.5 dB, -3.0 dB
AM tuner section
Tuning frequency range (for U.S.A. and Canada)
10 kHz step......................................530 kHz ~ 1.700 kHz
Tuning frequency range (except for U.S.A. and Canada)
9 kHz step........................................531 kHz ~ 1,602 kHz
10 kHz step......................................530 kHz ~ 1,610 kHz
Usable sensitivity (30% mod., S/N 20 dB)
............................................................16 uV / (600 uV/m)
Signal to noise ratio (30 % mod. , 1 mV input) ..............48 dB
GENERAL
Power consumption
(1070VR) ..................................................................2.9 A
(1060VR) ..................................................................2.5 A
AC outlet
SWITCHED ..........................2 (total 100 W, 0.83 A max.)
Dimensions.........................................W : 440 mm (17-5/16")
.......................................................H : 147 mm (5-13/16")
.......................................................D : 392 mm (15-7/16")
Weight (Net)
(1070VR)....................................................11 kg (24.3 lb)
(1060VR)....................................................10 kg (22.0 lb)
59