Panasonic HDX900 Operating Instructions Manual page 68

Chapter 4 Adjustments and settings for recording
Loading the data of the selected file
4
Turn the JOG dial button to move the arrow (cursor) to
the READ item.
< CARD READ/WRITE >
R.SELECT
#
READ
W.SELECT
WRITE
CARD CONFIG
TITLE READ
TITLE:
1: ********
2: ********
3: ********
4: ********
5
When the JOG dial button is pressed, the following
message appears.
READ?
YES
#
NO
6
Turn the JOG dial button to move the arrow (cursor) to
YES, and press the JOG dial button.
When the data loading is completed, the following
message appears.
READ OK
68
Downloaded From CamcorderManual.com Panasonic Manuals
:1
:1
5: ********
6: ********
7: ********
8: ********
(continued)
If one of the following messages appears when the JOG dial button is
pressed, the data cannot be loaded.
Error message
READ NG NO CARD
(setup card has not been inserted)
READ NG FORMAT ERROR
(formatting error)
READ NG NO FILE
(file not found)
READ NG ERROR
(the data cannot be loaded)
7
Press the MENU button to exit the menu operations.
The setting menu is cleared, and the displays showing
the unit's current statuses appear at the top and bottom
of the viewfinder screen.
Remedial action
Insert the card.
The card was formatted by a device
other than the unit.
Replace the card.
Save the file data.
Data saved by devices other than unit
cannot be loaded.