Audiovox Pursuit PRO-9775 Installation Manual page 7

Pursuit series 4 channel remote car starter with full feature alarm system

Hide thumbs Also See for Pursuit PRO-9775:

Table of Contents

Purple Wire: (+) Door Trigger Input

If the vehicle's door courtesy light switches + 12 volts when the door is opened, (Some Fords and some

Imports), you must connect this wire to the positive output from one of the vehicle's door pin switches.

In most cases, the Purple wire will need to be connected to only one door switch no matter how many

doors the vehicle has as most door lighting circuits are wired in parallel.

Note for vehicles with interior delay lighting see programming under title "Completing The Installation".

Dark Green Wire: (-) Instant Trigger Input

This is the instant on ground trigger input wire. This wire must be connected to the hood and trunk pin

switches previously installed.

Note: This wire will be shunted when remote control channel 3 is accessed, (trunk release). This wire

will remain shunted all the while there is ground present and for 5 seconds after the ground is removed.

This allows the operator to open the trunk via the remote transmitter without having to first disarm the

alarm system. See below for wiring detail.

Positive Door Switch Wiring Detail

Hood Pin Switch Detail

128-6533

7 of 24

Table of Contents

Pursuit series