Advertisement
6.Capacitor Disposal
W h e n d i s p o s i n g o f c a p a c i t o r s , u s e o n e o f t h e
following methods.
I n c i n e r a t e a f t e r c r u s h i n g t h e c a p a c i t o r o r
puncturing the can wall (to prevent explosion due
to internal pressure rise). Capacitors should be
incinerated at high temperatures to prevent the
release of toxic gases such as chlorine from the
polyvinyl chloride sleeve, etc.
Dispose of as solid waste.
L o c a l l a w s m a y h a v e s p e c i f i c d i s p o s a l
requirements which must be followed.
The application guidelines above are taken from:
Technical Report EIAJ RCR-2367 issued by the Japan
Electronic Industry Association, Inc. -
Guideline of notabilia for aluminium electrolytic
capacitors with non-solid electrolytic for use in
electronic equipment.
Refer to this Technical Report for additional details.
Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use.
Whenever a doubt about safety arises from this product, please inform us immediately for technical consulation without fail.
Aluminum Electrolytic Capacitor
– EE22 –
Mar. 2005
Advertisement
