Special Features; Aspect Button; Bbe Button; Sap Button - Panasonic CT-26WC15 Operating Instructions Manual

S F
PECIAL EATURES

Special Features

ASPECT Button

Customer Options depending on Component Input Signal
INPUT
DISPLAY ON SCREEN
SIGNAL
1080i 16:9 only
480p (16:9) Default to 16:9
Default to FULL mode.
480p (4:3) Note: Will stretch picture
horizontally.
480i Default to JUST mode
The ASPECT button on the remote control lets you choose
one of four display modes, depending on the formats of the
received signal and your preferences.
ASPECT
Image on
Input Signal
16:9 Screen Size
480i or 480p 4
4:3
ASPECT
Image on
Input Signal
16:9 Screen Size
16
480i or 480p
ZOOM
Note: If menu is displayed while in Zoom mode, the aspect
will change to Full to display complete menu.
ASPECT
Image on
Input Signal
16:9 Screen Size
16
480i or 480p
FULL
ASPECT
Input Signal Image on
16:9 Screen Size
16
480i
JUST
10
ASPECT BUTTON
OPTIONS
No options
4:3, Full or Zoom (see
below)
4:3, Full or Zoom (see
below)
4:3, Full, Just or
Zoom (see below)
This will display a 4:3 picture
in its standard 4:3 size with
black side bars. (Not
recommended for viewing
4:3 pictures as it may create
a permanent image
3
screen if displayed for a
prolonged period of time.)
This will expand the 4:3
picture uniformly (width and
height) to full screen width
and then reposition the
picture vertically.
9
(Recommended for letterbox
pictures.)
This will show picture at full
screen size. (Recommended
for anamorphic pictures.)
9
This will stretch the right and
left edges of a 4:3 picture to
fill the screen. The center of
the screen will have aspect
correction applied. The size
9
of the picture will depend on
the original signal.
(Recommended for regular
TV viewing.)

BBE Button

Press this button to turn BBE sound feature On or Off.

SAP Button

Press this button to cycle through different audio modes. For
example:
• If receiving STEREO, SAP and MONO or receiving
STEREO and MONO only, pressing SAP button will
toggle the audio as follows:
STEREO
Note: The available choices are indicated in red.

Direct Video Input Selection

This feature lets you select video inputs directly using the
TV/VIDEO button and the numeric keys on the remote
control.
Procedure
TV/VIDEO
on
• Press
Input selection menu.
1 TV
2 COMPONENT1
3 COMPONENT2
4 HDMI
5 VIDEO1
6 VIDEO2
7 VIDEO3
8 VIDEO4
For models CT-26WX15,
CT-30WX15 and
CT-34WX15 only.
• Press corresponding number key on the remote control
to select the input of your choice.
Note: Video input can also be selected by pressing TV/VIDEO,
then the CH
SAP MONO
on the remote control to display the
1 TV
2 COMPONENT1
3 COMPONENT2
4 HDMI
5 VIDEO1
6 VIDEO2
7 VIDEO3
For models CT-26WC15,
CT-30WC15 and
CT-34WC15 only.
buttons.