Cisco 2600 series Installation Manual page 5

Chapter 3 Installing the Router
•
Figure 3-4
Bracket for use
with a 19-inch rack
Figure 3-5
chassis side opposite fans
Attaching the Brackets to Cisco 261x, Cisco 262x, Cisco 26xxXM, and Cisco 265x Series Routers
To install the chassis in a rack, attach the brackets in one of the following ways:
•
•
•
Note Use the screws that came with your router package for attaching the brackets.
Note If you are installing a Cisco 2600 series router in a 19-inch rack with a 17.5-inch opening, orient the
rack-mount brackets so that, when installed, they do not increase the width of the chassis. (See
Figure
If you are installing a Cisco 2600 series router in a 19-inch rack with a 17.75-inch opening or a 23- or
24-inch rack, orient the rack-mount brackets so that, when installed, they increase the width of the
chassis. (See
OL-2171-02
If the rack contains stabilizing devices, install the stabilizers before mounting or servicing the unit
in the rack.
Brackets for Cisco 261x, Cisco 262x, Cisco 26xxXM, and Cisco 265x Series Routers
Bracket for use with a
23-inch or 24-inch rack
Brackets for Cisco 2691 Router
Narrow bracket for
With the front panel forward (see
With the rear panel forward (see
In a center-mount rack, with the rear panel forward (see
3-6.)
Figure 3-7.)
Slots for
cable tie
attachment
Wide bracket for
chassis side with fans
Figure 3-6 and Figure 3-7)
Figure 3-8 and Figure 3-9)
Figure 3-10
Cisco 2600 Series Routers Hardware Installation Guide
Setting Up the Chassis
through Figure 3-12)
3-5