Cisco 2600 series Installation Manual page 11

Chapter 3 Installing the Router
Use 19-inch brackets (shown in
Note
the most stable installation for the chassis.
To wall-mount the chassis:
Attach the brackets as shown in
Step 1
Figure 3-17 Attaching the Wall-Mount Brackets
0
Attach the chassis assembly to the wall as shown in
Step 2
provide. We recommend the following:
For the best support of the chassis and cables, attach the brackets so that the screws align with a
•
vertical wall stud. (See
the wall when cables are attached.
For the best ventilation of the chassis, mount the chassis with the power supply and fan at the top.
•
Make sure there is clearance between the router and the wall.
OL-2171-02
Figure 3-4) to wall-mount the chassis. The small brackets provide
Figure 3-17.
Figure
Figure 3-18.) This position will prevent the chassis from pulling away from
Cisco 2600 Series Routers Hardware Installation Guide
Setting Up the Chassis
3-18, using screws and anchors that you
3-11