Advertisement
How to Use the On Screen Menu
Three types of information are displayed on the screen. The input signal status, picture adjusting knob status, and
the menu display.
Input signal status
1
Picture adjusting knob status
Menu display
MENU
Displays the operation explanation for the
menu button.
10
1. The selected input line (
• VIDEO, Y/C, SDI1, SDI2,
YP
P
/RGB-VIDEO/RGB-COMP.
B
R
2. Signal format
• The display status can be set in "STATUS
DISPLAY" in the "SYSTEM CONFIG" menu
(
page 18).
• If "UNSUPPORT SIGNAL" is displayed, then either
the current input signal is not supported or the
"INPUT SELECT" menu setting needs to be
changed.
• When "NO SIGNAL" is displayed, there is no input
signal.
Note:
"UNSUPPORT SIGNAL" and "NO SIGNAL" may not be
displayed correctly.
Picture adjusting knob (
• This knob can be rotated and pushed.
• The status display appears when the knob is
pushed.
The display disappears when the knob is pushed
again, or if the knob is not operated for 10 seconds.
• Settings can only be adjusted in the status display.
• The display position can be changed (
"ROTARY POSITION").
Status display:
PHASE, CHROMA, BRIGHT, CONTRAST
Note:
The volume knob status display is not displayed on the
screen.
• This is displayed when the menu is used.
• The display disappears if remains idle for 2 minutes.
• The display position can be changed (
"MENU POSITION").
page 7,
)
page 7,
)
page 18
page 18
Advertisement
