Operation - Kodak 750 Manual

10
operation
PROJECT SLIDE
Turn on the projection lamp by sliding the power switch
to either HIGH (500-watt illumination) or LOW (425-watt
illumination).
ELEVATION
To center the lighted area on the screen, elevate the front of
the projector by turning the ELEVATING WHEEL. If the
lighted area is not aligned with the screen, an adjustment
may be made with the LEVELING FOOT.
FOCUS
Momentarily depress the forward button on the side of the
projector or the FOR (forward) button on the remote con-
trol to put the first slide into viewing position.
Focus the picture on the screen by rotating the FOCUS
KNOB .in either direction or by pushing the focus lever on
the remote control back and forth.
J:::IIBI l:!mll
Cll!l!rll
CAROUSEl 750
~ 'IIIOJIClOIII
~