Audio Settings - Kenwood KDC-BT365U Instruction Manual

AUDIO SETTINGS

While listening to any source...
1 Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select [AUDIO CONTROL], then press the knob.
3
Turn the volume knob to select an item (see the following table),
then press the knob.
4 3
Repeat step until the desired item is selected or activated.
5
Press and hold
(or using RC-406)
Press AUD to enter [AUDIO CONTROL].
1
Press J / K to select an item, then press
2
To return to the previous setting item, press
SUB-W LEVEL –50 to +10 (0): Adjusts the subwoofer output level.
MANUAL EQ
BAND1 LEVEL LEVEL
BASS EXTEND
BAND2 LEVEL to –9 to +9 (0): The sound elements (frequency level, tone level, Q factor)
BAND13 LEVEL are preset into each selection (BAND1 LEVEL to BAND13 LEVEL).
Adjusts the level to memorize for each source. (Before making an
adjustment, select the source you want to adjust.)
Q FACTOR 1.35/ 1.50/ 2.00: Adjust the quality factor.
PRESET EQ NATURAL/ ROCK/ POPS/ EASY/ TOP40/ JAZZ/ POWERFUL/ USER:
Selects a preset equalizer suitable to the music genre. (Select [USER] to
use the settings made in [MANUAL EQ].)
BASS BOOST LEVEL1/ LEVEL2/ LEVEL3/ LEVEL4/ LEVEL5 or LV1/ LV2/ LV3/ LV4/
LV5: Selects your preferred bass boost level. ; OFF: Cancels.
LOUDNESS LEVEL1/ LEVEL2 or LV1/ LV2: Selects your preferred low and high
frequencies boost to produce a well-balanced sound at a low volume
level. ; OFF: Cancels.
SUBWOOFER SET ON: Turns on the subwoofer output. ; OFF: Cancels.
JS_KWD_KDC_BT365U_KN_EN_ff.indd 21
to exit.
.
.
–9 to +9 (0): (Refer to BAND2 LEVEL below.)
ON: Turns on the extended bass. ; OFF: Cancels.
FADER
BALANCE
VOLUME OFFSET
SOUND EFFECT
SOUND RECNSTR
(Sound
reconstruction)
SPACE ENHANCE
Default: XX
SND REALIZER
STAGE EQ
DRIVE EQ
SPEAKER SIZE
FRONT
REAR
SUBWOOFER
R15 to F15 (0): Adjusts the rear and front speaker output balance.
L15 to R15 (0): Adjusts the left and right speaker output balance.
–15 to +6 (0): Preset the initial volume level of each source. (Before
adjustment, select the source you want to adjust.)
(Not applicable for TUNER source, AUX source and SIRIUS XM source.)
ON: Creates realistic sound by compensating the high-frequency
components and restoring the rise-time of the waveform that are lost
in audio data compression. ; OFF: Cancels.
(Not applicable for TUNER source.)
SMALL/ MEDIUM/ LARGE or SML/ MED/ LRG: Virtually enhances
the sound space. ; OFF: Cancels.
LEVEL1/ LEVEL2/ LEVEL3 or LV1/ LV2/ LV3: Virtually makes the
sound more realistic. ; OFF: Cancels.
LOW/ MIDDLE/ HIGH: Virtually adjust the sound position heard from
the speakers. ; OFF: Cancels.
ON: Boosts the frequency to reduce the noise heard from outside the
car or running noise of the tyres. ; OFF: Cancels.
The frequency and slope settings are automatically set for the
crossover of the selected speaker. ( 22)
SIZE 3.5"/ 4"/ 4.75"/ 5"/ 6.5"/ 6.75"/ 7"/ 4×6/ 5×7/
6×8/ 6×9/ 7×10: Selects according to the connected
speaker size for optimum performance.
TWEETER SMALL/ MIDDLE/ LARGE: Selects according to the
size range of the connected tweeter for optimum
performance. ; NONE: Not connected.
3.5"/ 4"/ 4.75"/ 5"/ 6.5"/ 6.75"/ 7"/ 4×6/ 5×7/ 6×8/ 6×9/
7×10: Selects according to the connected speaker size for optimum
performance. ; NONE: Not connected.
6.5"/ 8"/ 10"/ 12"/ 15" OVER: Selects according to the connected
speaker size for optimum performance. ; NONE: Not connected.
21
ENGLISH
12/10/2015 9:38:30 AM