Installations and connections
Installing the ink film
Insert the orange
gear into the left slot
of the main unit.
When the unit runs out of ink film, the following message will be displayed.
l
フィルムガシナクナリマシタ
コウカンシテクダサイシU 2 3
Install a new ink film.
Replacement ink film:
KX-FAN200 (30 m)
・As of September 2005.
4 4
フィルムガシナクナリマシタ
ヒンバン : K X ̶ F AN200
¥1,208
・Tax included.
1
Press here and open the control panel.
2
Insert the ink film.
Insert the orange core into the right
slot of the main unit.
3
If the ink film is slack, tighten it by
winding this gear (orange).
4
Close the control panel until it locks.