Storing names and telephone numbers for
automatic
dialling!
The unit's memory allows you to use both the One-Touch Dial and the Speed Dial for rapid
access to your most frequently dialled numbers.
One-Touch Dial: The unit is equipped with 3 One-Touch Dial keys, each of which is divided
into an upper station and a lower station.
Speed Dial:
The unit is equipped with 50 additional dialling stations. These stations are
assigned to 2-digit numbers (00–49).
1
Press
MENU
two times.
Display:
2a
Programming for One-Touch Dial:
For upper stations (1–3)
Press one of the One-Touch Dial keys.
For lower stations (4–6)
Press
LOWER
One-Touch Dial keys.
2b
Programming for Speed Dial:
Press
, then press the desired 2-digit
number (00–49).
Enter the station name, up to 10 characters,
3
by following the instructions on page 21.
Example:
4
Press
START/COPY/SET
Example:
5
Enter the telephone number up to 30 digits in
length.
To enter a hyphen in a phone number,
press
1
(One-Touch Dial key 1).
Example:
Press
6
START/COPY/SET
To program other stations, repeat steps
2 to 6.
7
Press
STOP
.
STORE TEL NO.
, then press one of the
NAME=John
.
<S02>=
<S02>=111-4497
.
REGISTERED
STORE TEL NO.
Automatic Dialling
MENU
START/COPY/SET
Helpful hint:
You can confirm the stored items on the
telephone number list (p. 64).
Note:
A hyphen entered in a telephone
number is counted as two digits.
To keep the telephone number secret
Press
(One-Touch Dial key 3) after
3
entering the telephone number in step 5.
A secret number cannot be viewed after this
is set.
The telephone number will not appear on the
telephone number list.
Pressing
does not count as a digit.
3
To edit a stored station name and
number
Enter the desired name in step 3.
Enter the desired number in step 5.
1
3
One-Touch
Dial keys
STOP
LOWER
27