Connect The Baudisch.cp-Cam-Ahd; Operating At A Sip Door Module Maxi / Plus Or Touchme Maxi; Stand-Alone Operation - Baudisch CP-CAM-AHD ECO / MAX Manual

Baudisch.CP-CAM-AHD ECO / MAXI
4.2.

Connect the Baudisch.CP-CAM-AHD

4.2.1.

Operating at a SIP door module MAXI / PLUS or TouchMe MAXI

Baudisch.CP-CAM-AHD
Baudisch.CP-CAM-AHD
•
Connect the CP-CAM-AHD with the supplied cable with the ethernet output / CP-CAM
Out of the Baudisch.SIP door module MAXI / PLUS or the Baudisch.TouchMe MAXI.
•
Connect the SIP door module MAXI / PLUS either with a PowerOverEthernet (PoE)
switch or with a 24V DC power supply and a ethernet switch or connect the
Baudisch.TouchMe MAXI with a 24V DC power supply and a ethernet switch.
4.2.2.

Stand-alone operation

Baudisch.CP-CAM-AHD
•
Connect the CP-CAM-AHD with the supplied cable with the CP-CAM port of the
Baudisch.CP-CAM Supply Interface.
•
Connect the IP Network port of the Supply Interface with a ethernet switch and the
connections 24V and GND with a 24V DC power supply.
20131030SC_HB-EN_CP-CAM-AHD-Steel.doc
Version 1.1 - Stand: 19.11.2013
CP-CAM
Baudisch.CP-CAM Supply interface
10 / 10
(CP-CAM) Output
Baudisch.SIP Door module
MAXI / PLUS
(CP-CAM) Output
Baudisch.TouchMe MAXI
IP Network / LAN
24V DC / 0.2A
s/15.05.2014