Table of Contents
Advertisement
Safety instructions
CAUTION:
Laser radiation
The printer of this unit utilises a laser. Use
of controls or adjustments or performance
of procedures other than those specified
herein may result in hazardous radiation
exposure.
Fuser unit
Caution:
Do not touch the
bottom of this cover.
It is very hot.
Fuser unit
The fuser unit is inside of the unit and gets
hot. Do not touch it when removing the
jammed paper or cleaning the lower glass.
4
Toner cartridge
Be careful of the following when you
handle the toner cartridge:
— Do not leave the toner cartridge out of
the protection bag for a long time. It will
decrease the toner life.
— If you ingest any toner, drink several
glasses of water to dilute your stomach
contents, and seek immediate medical
treatment.
— If any toner comes into contact with
your eyes, flush them thoroughly with
water, and seek medical treatment.
— If any toner comes into contact with
your skin, wash the area thoroughly
with soap and water.
Drum unit
Read the instructions on pages 16 and 17
before you begin installation of the drum
unit. After you have read them, open the
drum unit protection bag. The drum unit
contains a photosensitive drum. Exposing
it to light may damage the drum.
Once you have opened the protection bag:
— Do not expose the drum unit to light for
more than 5 minutes.
— Do not touch or scratch the green drum
surface.
— Do not place the drum unit near dust or
dirt, or in a high humidity area.
— Do not expose the drum unit to direct
sunlight.
Static electricity
To prevent static electricity damage to the
interface connectors (parallel and USB),
ADF socket or other electrical components
inside the unit, touch a grounded metal
surface, such as the metal part under the
parallel interface connector before touching
the components.
Metal part
Advertisement
Table of Contents
