Table of Contents
Advertisement
Error Messages
Reports!
If your unit cannot send a fax, check the following:
— the number you dialled is correct,
— the other party's machine is a facsimile.
If the problem remains, correct it by following the communication message printed on the
sending and journal reports (p. 35).
COMMUNICATION ERROR
(CODE: 40–42, 46–72, FF)
A transmission or reception error occurred.
Try again or check with the other party.
COMMUNICATION ERROR
(CODE: 43, 44)
A line problem occurred. Connect the
telephone line cord to a different socket
and try again.
An overseas transmission error occurred.
Try using the overseas mode of feature
#23 (p. 63).
DOCUMENT JAMMED
The document is jammed. Remove the
jammed document (p. 77).
ERROR-NOT YOUR UNIT
(CODE: 54, 59, 70)
A transmission or reception error occurred
because of a problem with the other
party's fax machine. Check with the other
party.
MEMORY FULL
The document was not received as a
result of the memory being full.
66
NO DOCUMENT
The document was not fed into the unit
properly. Reinsert the document and try
again.
OTHER FAX NOT RESPONDING
The other party's fax machine is busy or
has run out of recording paper. Try again.
The document was not fed properly.
Reinsert the document and try again.
The other party's fax machine rings too
many times. Send the fax manually
(p. 34, 35).
The other party's machine is not a
facsimile. Check with the other party.
The number you dialled is not in service.
PRESSED THE STOP KEY
{ was pressed and fax
communication was cancelled.
THE COVER WAS OPENED
The printer cover was opened. Close it and
try again.
OK
Fax communication was successful.
Advertisement
Table of Contents
