Table of Contents
Advertisement
Setup (PC)
Connecting to a
Panasonic Multi-Function Station software enables your fax machine to carry out the following
functions:
— Printing on plain paper, transparencies, labels and envelopes
— Scanning documents and converting an image into text with Readiris OCR software
— Scanning from other applications for Microsoft
— Storing, editing or erasing entries in directories from your PC
— Programming the basic and advanced features from your PC
— Sending, receiving fax documents using your PC
To run Multi-Function Station software, you need the following:
— OS:
— CPU:
— Memory minimum: Windows 95/98/NT4.0:
— Hard disk:
— Other:
When using an IEEE1284 compliant parallel cable:
Parallel cable (amphenol 36 pin, less than 3 metres long) must be purchased
separately.
When using a USB cable (Windows 95/NT4.0 do not offer USB support):
USB cable (less than 3 metres long) must be purchased separately.
After connecting the USB cable, you must set the cable type to "USB" (feature #15
on page 62).
Note:
If you want to replace the parallel cable with a USB cable and vice versa, see page 72.
50
computer!
Works with Windows 95/98/Me/2000/XP and Windows NT
Windows 95/98: Pentium
Windows Me:
Pentium 150 MHz or higher processor
Windows NT4.0: Pentium 133 MHz or higher processor
Windows 2000: Pentium 166 MHz or higher processor
Windows XP:
Pentium 300 MHz or higher processor
Windows Me:
Windows 2000:
Windows XP:
More than 50 MB available space
Parallel (IEEE1284) port or USB port, and CD-ROM drive
®
®
Windows
that support TWAIN scanning
®
90 MHz or higher processor
24 MB (32 MB or more is recommended.)
32 MB (64 MB or more is recommended.)
64 MB
128 MB
®
4.0
Advertisement
Table of Contents
