Safety Instructions - Panasonic KX-FLB756E Operating Instructions Manual

Panasonic flat-bed multi-function laser fax operating instructions kx-flb756e
Table of Contents

Advertisement

Important safety
When using this unit, basic safety
precautions should always be followed to
reduce the risk of fire, electric shock, or
personal injury.
1. Read and understand all instructions.
2. Follow all warnings and instructions
marked on this unit.
3. Unplug this unit from power outlets
before cleaning. Do not use liquid or
aerosol cleaners. Use a damp cloth for
cleaning.
4. Do not use this unit near water, for
example near a bathtub, wash bowl,
kitchen sink, or the like.
5. Place the unit securely on a stable
surface. Serious damage and/or injury
may result if the unit falls.
6. Do not cover slots and openings on the
unit. They are provided for ventilation and
protection against overheating. Never
place the unit near radiators, or in a place
where proper ventilation is not provided.
7. Use only the power source marked on
the unit. If you are not sure of the type of
power supplied to your home, consult
your dealer or local power company.
8. For safety purposes this unit is equipped
with a grounded plug. If you do not have
this type of outlet, please have one
installed. Do not defeat this safety feature
by tampering with the plug.
9. Do not place objects on the mains lead.
Install the unit where no one can step or
trip on the mains lead.
10. Do not overload wall outlets and
extension cords. This can result in the
risk of fire or electric shock.
SAVE THESE INSTRUCTIONS
instructions!
11. Never push any objects through slots in
12. To reduce the risk of electric shock, do
13. Unplug this unit from the wall outlet and
14. During thunderstorms, avoid using
15. Do not use this unit to report a gas leak,

Safety instructions

this unit. This may result in the risk of fire
or electric shock. Never spill any liquid on
the unit.
not disassemble this unit. Take the unit to
an authorised service centre when
service is required. Opening or removing
covers may expose you to dangerous
voltages or other risks. Incorrect
reassembly can cause electric shock
when the unit is subsequently used.
refer servicing to an authorised service
centre when the following conditions
occur:
A. When the power supply cord or plug is
damaged or frayed.
B. If liquid has been spilled into the unit.
C. If the unit has been exposed to rain or
water.
D. If the unit does not work normally by
following the operating instructions.
Adjust only controls covered by the
operating instructions. Improper
adjustment may require extensive
work by an authorised service centre.
E. If the unit has been dropped or
physically damaged.
F. If the unit exhibits a distinct change in
performance.
telephones except cordless types. There
may be a remote risk of an electric shock
from lightning.
when in the vicinity of the leak.
3

Advertisement

Table of Contents
loading

Table of Contents