Table of Contents
Advertisement
You see this screen:
4. Select one of these options:
• Wi-Fi/Network Settings: Resets all network settings.
• Clear All Data and Settings: Resets all control panel settings.
You see a confirmation screen.
5. Select the up arrow button to reset the selected settings. (Press the down arrow button if you want to
cancel the operation.)
Parent topic:
Solving Setup Problems
Check these sections if you have problems while setting up your product.
Noise After Ink Installation
Software Installation Problems
Parent topic:
Noise After Ink Installation
If you hear noises from your product after installing the ink cartridge, try these solutions:
• The first time you install the ink cartridge, the product must charge its print head. Wait until charging
finishes before you turn off the product, or it may charge improperly and use excess ink the next time
you turn it on. Your product is finished charging the print head when the
• If the product's print head stops moving or making noise, and the charging process has not finished
after 6 minutes, turn off your product. Turn it back on and check to see if charging is still in progress. If
it is still in progress, contact Epson for help.
Solving Problems
Solving Problems
172
power light stops flashing.
Advertisement
Table of Contents
