Led Indicators - D-Link dgs-1008p Quick Installation Manual

LeD inDicators

the led indicators allow you to monitor, diagnose, and troubleshoot any potential problem within the
switch, connection, or attached devices.
LED
Power
Link/Act/Speed
PoE ( Ports1 to 4 )
PoE Max.
4
Color Status
Green solid light
off
Green solid light
Blinking
amber solid light
Blinking
off light off
Green solid light
off
Red solid light
Red solid light
Blinking
off light off
Description
power on
power off
connection to a 1000 mbps ethernet device.
the port is receiving or transmitting data.
connection to a 10/100 mbps ethernet device.
the port is receiving or transmitting data.
no link
the port is successfully connected to a poe
device and is powering the device properly.
no connection to a poe device
the poe port has failed, possibly due to:
1. poe total power budget shortage
2. over current: exceeds the power current of
powered device's classification.
3. short circuit: an intentional short circuit has
been performed on a powered device.
the poe devices' output power is over
45 W. In the meantime, no additional devices
can be powered on.
If connected devices are unplugged and the
remaining power is over 7 W, the poe max. led
will blink for two minutes.
the power usage is less than the power budget
of 45 W.
DGs-1008p