Troubleshooting - D-Link dgs-1008p Quick Installation Manual

8-port gigabit ethernet switch with 4 poe p

Hide thumbs Also See for dgs-1008p:

Available languages

TROUBLESHOOTING

setUp anD conFiGUration probLeMs

1. WHAT SHOULD I DO IF THE POWER LED DOES NOT LIGHT UP?

- check if the power adapter is connected properly to the wall socket and the back of the device.

- ensure that the on/off switch is in the "on" position.

2. WHAT SHOULD I DO IF A CONNECTED DEvICE IS NOT DETECTED?

- ensure the port led is illuminated or flashing. If not, try using a new lan cable.

3. WHAT SHOULD I DO IF A POE DEvICE IS NOT POWERED By THE DGS-1008P?

- ensure that the poe device is connected to one of the four poe enabled ports (1 to 4) and the

connected poe devices do not exceed the maximum power budget of 52 W.

DGs-1008p

Table of Contents

Dgs-1008p