Channel Editor Functions And Remote Button - Samsung HG32NE460S Installation Manual

Series 460, 470, 477, 478

Hide thumbs Also See for HG32NE460S:

Quick setup manual (2 pages)

Table Of Contents

Table of Contents

The picture below shows a sample Channel Editor screen.

20-2

50-1

50-3

51-1

y a Indicates an analog channel.

y Channels without an a are digital channels.

✎ If Dynamic SI in the Hospitality Option Menu is On, Channel Editor will display no digital channels. You must set

Dynamic SI to Off before you can edit digital channels in Channel Editor.

y The guide at the bottom of the Channel Editor menu displays the remote buttons you need to press to apply Channel

Editor functions.

1 Using the remote's up or down arrow key, highlight the channel that you want to edit.

– To edit more than one channel, move the highlight to a channel, and then press the ENTERE key. A check will

appear in the check box next to the channel. Repeat for each channel you want to edit.

2 To delete the channel or channels you selected from the channel list, press the red button on the remote.

– To delete two or more channels simultaneously, select multiple channels in Step 1, and then press the red

button on the remote.

✎ If you want to delete the scambled channels, you should run the process below Hotel option > Channel >

Channel Setup > Channel Settings > Clear Scrambled Channel.

3 Press the green button on the remote to select all channels.

4 To apply the video mute, press the yellow button on the remote.

– To apply the video mute to two or more channels simultaneously, select multiple channels in Step 1, and then

press the yellow button on the remote.

5 To view information about a channel, press the

6 Press the

TOOLS