Samsung HG32NE460S Installation Manual page 31

Menu Item
Clone TV to USB
Clone USB to TV
Cloning
Setting Auto
Initialize
REACH 3.0
REACH Channel
Group ID
IPG Room Type
Ticker
REACH
Solution
REACH Update Time
REACH Update
Immediate
Room Number
REACH Server
Version
Password Input
Password Setting
Password Reset
Security
Security Mode
USB
HDMI
DRM Mode
DRM
PI AES Data
PI AES Log
View PI AES Log
initial Value
Clone the current TV options to a USB memory device.
Clone the saved TV options on a USB memory device to the TV.
If you set Setting Auto Initialize to On, and the TV's power is turned off and on, the guest
OFF
side menu items are restored to their cloned values. See page 39.
y OFF: Close REACH 3.0.
OFF
y ON: Open REACH 3.0.
87 : Assign a DTV channel number to carry the update REACH data. This channel number
...
must be the same as the number set on the Reach server.
All : Select the group ID of the REACH server. (Refer to the REACH server manual for
...
more details)
You can receive up to 3 EPG information headed to the Americas according to Room
Type from SI, and it displays the appropriate channel list and EPG information according
...
to the value set on TV. For IPG Room Type, there are Default / Public / Roomtype 3
within the hotel Factory Install menu, and its default value is Default.
y ON: The TICKER content is displayed.
OFF
y OFF: The TICKER content is not displayed.
Lets you set when data such as updated SW, cloning files, and S-LYNC REACH contents is
downloaded from the REACH server to the TV :
y 1hour : Every hour
y 2hour : Every 2 hours
...
y 12:00 am : every 12:00 a.m.
y 2:00 am : every 2:00 a.m.
y 12:00 pm : every 12:00 p.m.
y 2:00 pm : every 2:00 p.m.
y ON : Whenever the TV enters standby mode (the power cord is plugged in and the
power is off), the REACH data is updated on the TV.
...
y OFF : The REACH data is only updated on the TV at the REACH server update time.
... Setting Room Number.
0000 0000 : Displays the current REACH data version.
Input Password 00000000.
... Set new Password.
... Reset Password to 00000000.
... Security Mode ON or OFF.
... USB Disable or Enable.
... HDMI Disable or Enable.
Configures CAS support.
OFF: Turns off CAS support.
OFF
LYNK DRM : Select to turn on S-LYNK DRM CAS support only.
477 / 478
Pro:idiom : Select to turn on Pro:Idim CAS support only. (only for 477/478 and above
:pro:idiom
models)
LYNK DRM,PI : Select to have the TV support S-LYNK DRM CAS and Pro:Idiom CAS. (only
for 477/478 and above models)
0x0000 Displays the current state of Pro:idiom AES. (only for 477/478 and above models)
PI AES Log consists of Pro:idiom AES diagnostic register, here after referred as AESD,
OFF values. These register log will help us diagnose PI key loss issue in the field and provide
solution for it. (only for 477/478 and above models)
... Displays Pro:idiom AES Log OSD (only for 477/478 and above models)
Description
31
English