Related Manuals for Pima SENTRY
Summary of Contents for Pima SENTRY
- Page 1 SENTRY IGITAL TANDALONE ECEIVER NSTALLATION UIDE Pima Electronic Systems Ltd. P/N 4410341 www.pima-alarms.com XX, en (Mar. 2011)
-
Page 2: Table Of Contents
PIMA’s prior written consent is granted. All efforts have been made to ensure that the content of this manual is accurate. Pima retains the right to modify this manual or any part thereof, from time to time, without serving any prior notice of such modification. -
Page 3: Introduction
Monitoring Station management application via serial (RS-232) channel or network (Ethernet). The Sentry is controlled and monitored by the PimaGuard application. For any issue related to the protocols supported by the Sentry, or upgrading its driver, or making any change to its configuration, refer to the PimaGuard guide. -
Page 4: Components & Architecture
Sentry Installation Guide Components & Architecture Figure 1. The front & back panels Figure 2. Mode of operation The product package content The Sentry box; AC cord; Battery cables with a fuse holder; Radio transceiver cable with a D-type connector. -
Page 5: Safety Instructions
Safety instructions The Sentry must be connected to ground; To use a radio transceiver, connect the screw-nut on the Sentry’s back panel to solid ground with a thick conductor. NSTALLATION Place the Sentry on a firm surface. Follow the next steps according to your requirements: Connect telephone cables to the RJ-11 sockets on the back panel. -
Page 6: Pstn Test
The Sentry is provided with the UltraVNC (www.uvnc.com) free remote desktop application. It is configured with the password “sentry”. To use it: a) Forward port 5900 to the Sentry or its Router. For instructions, refer to www.portforward.com; b) On the remote computer, browse to www.uvnc.com/download/index.html... -
Page 7: Troubleshooting
Sentry Installation Guide ROUBLESHOOTING In case of system malfunction, use the following table for troubleshooting. To shut down the Sentry, press the Power button shortly. Fault Resolving Low Battery LED illuminates Verify that the battery supplies 12V; if not, replace it or wait for recharging, if the battery had been discharged;... - Page 8 Sentry Installation Guide PIMA Electronic Systems Ltd., 5 Hatzoref Street, Holon 58856, Israel Tel: +972.3.6506414 Fax: +972.3.5500442 Email: support@pima-alarms.com Web: http://www.pima-alarms.com Partner‟s website: http://www.pima-alarms.com/site/modules/login.asp PIMA Electronic Systems Ltd.