AB Quality 1794-IB16 Installation Instructions Manual page 13

24V dc FLEX I/O 16 Sink Input Module 13
Specifications - 24V dc Input Module Cat. No. 1794 IB16
Agency Certification UL UL Listed Industrial Control Equipment
(when product is
UL UL Listed for Class I, Division 2 Group A, B, C and D
marked)
Hazardous Locations
CSA CSA Certified Process Control Equipment for Class I,
Division 2 Group A, B, C, D Hazardous Locations
2
EEx European Union 94/9/EEC EMC Directive, compliant
with:
EN 50021; Potentially Explosive Atmospheres,
Protection n"
2
CE European Union 89/336/EEC EMC Directive,
compliant with:
EN 50081-2, Industrial Emissions
EN 50082-2, Industrial Immunity
EN 61326, Meas./Control/Lab., Industrial Requirements
EN 61000-6-2, Industrial Immunity
2
C-Tick Australian Radiocommunications Act,compliant with:
AS/NZS 2064, Industrial Emissions
1
You use this conductor category information for planning conductor routing as
described in the system level installation manual.
2
See the Product Certification link at www.ab.com for Declarations of Conformity, Certificates and other
certification details
European Zone 2 Certification
This equipment is intended for use in potentially explosive atmospheres as defined by European
Union Directive 94/9/CE.
The LCIE (Laboratoire Central des Industries Electriques) certifies that this equipment has been
found to comply with the Essential Health and Safety Requirements relating to the design and
construction of Category 3 equipment intended for use in potentially explosive atmospheres, given
in Annex II to this Directive. The examination and test results are recorded in confidential report
No. 28 682 101.
Compliance with the Essential Health and Safety Requirements has been assured by compliance
with EN 50021 (1999).
Publication 1794 IN072C-EN-P - October 2001