BMW 039 0259 B Installation Instructions Manual page 25

11. To install and connect the monitor, gooseneck and remote control
0
26
0
26
0
50
28
51
29
Retrofit / Installation kit No. 65 90 0 136 830
Installation Instructions No. 01 29 0 142 620
b
36
23
a
039 0299 B
50
23
039 0300 B
28
29
039 0301 B
Issue date: 10.2001
0
Do not predrill the instrument panel to secure
the retaining clip (23).
Screw the retaining clip (23) for the gooseneck (26)
on to the hatched area on the side part of the
instrument panel trim using self-tapping screws
3.5 x 30 (36).
Dimension a= 20 mm
Dimension b = 30 mm
Check that the retaining clip (23) is secure.
Thread the gooseneck (26) through the retaining
0
clip (23) and secure it.
When you close the retaining clip (23) the
tooth (50) must fully engage in each other
and the retaining clip (23) must tightly
enclose the gooseneck (26).
Clip the mounting plate for the holding station (29)
0
into the holding station (28).
Press the interlocks (50) into the engagements
pins (51) in the mounting plate for the holding
station (29).
EN/25