Table of Contents
Advertisement
QuickSpecs
Supported Products
Supported Configurations
1.
Upper Fan System
2. Interconnect Bays 1 /2
3. Interconnect Bays 3 / 4
4. Interconnect Bays 5 / 6
Mezzanines
c7000 Port Mapping
•
HPE Integrity i2 Server Blades
HPE Smart Update Firmware-HPE Integrity BL860c/870c/890c i2 System Firmware Bundle for
Linux/Windows, 26.41
HPE BladeSystem c7000 Enclosure - Rear View
Port mapping differs slightly between full height and half height server blades due to the support for
additional Mezzanine cards on the full height version.
Hewlett Packard Enterprise has simplified the processes of mapping Mezzanine ports to switch ports by
providing intelligent management tools via the Onboard Administrator and HPE Insight Manager
Software. The Onboard Administrator Guide and Enclosure Setup and Installation Guide provide detailed
information on port mapping.
HPE Virtual Connect FlexFabric-20/40 F8 Module
5. Interconnect Bays 7 / 8
6. On Board Administrator
7. Lower Fan System
8. Rear Redundant Power Complex
Page 5
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Virtual Connect FlexFabric-20/40 F8 Module and is the answer not in the manual?
Questions and answers