Product Setup - D-Link dub-h7 Quick Installation Manual

7-port hi-speed usb hub

Hide thumbs Also See for dub-h7:

PrODUCT

SETUP

QUICK INSTALLATION

DUB-H7

1. plug the power adapter into the receptor located on the

back panel of the duB-H7. plug the other end into a

power strip or wall outlet.

2. plug the usB type B connector (the square end of the

supplied usB cable) into the back of the duB-H7.

3. plug the usB type a connector (the flat end of the

supplied usB cable) into an available usB port on your

computer.

4. Your computer will automatically detect and install the

drivers for the duB-H7. You may now connect usB

2.0 or usB 1.1 devices to an available usB port on the

front of the duB-H7. the two black usB ports provide

additional power for fast-charging an ipad® or similar

product when the led is green (Fast-charge mode).

Table of Contents