Portacool CYCLONE PAC2KCYC01 Owner's Manual page 13

FAQ
HOW TO REPLACE YOUR KUUL EVAPORATIVE MEDIA
Step 1
Be sure to unplug your Portacool portable evaporative cooler before doing any maintenance. Lock the casters to keep
your evaporative cooler from moving while you are working. Remove the flap and KUUL evaporative media from the
®
evaporative cooler. The flap is attached at the top of the evaporative cooler with three screws. Remove the three screws
and set the flap aside.
Step 2
All KUUL evaporative media must be removed before accessing the inside of the evaporative cooler. Remove the center set
of KUUL evaporative media first by grasping at the top and tilting it out and away from the evaporative cooler. While tilting
the KUUL evaporative media out, lift it up and out of the evaporative cooler.
Step 3
Remove remaining KUUL evaporative media in the same manner. Set aside in a safe place to prevent damage while out of
the evaporative cooler. Once all the KUUL evaporative media has been removed, you should have access to the inside of
the evaporative cooler and internal components.