D-Link dwl-120+ Quick Installation Manual page 8

Using the Configuration Utility Using the Configuration Utility Using the Configuration Utility
Using the Configuration Utility Using the Configuration Utility
A. Status:
MAC Address of the
Access Point that is
associated with the
DWL-120+.
A
B
C
D
E
F
C. TxRate: The default
setting is 11Mbps;
however, TxRate settings
are automatically
determined by the DWL-
120+ depending on the
distance from the access
point.
Appendix Appendix
Appendix Appendix Appendix
Displays the
B. SSID
Identifier is the name
assigned to the wireless
network. The factory SSID
setting is set to default
D. Channel: Displays the
channel information. By
default, the channel is set
to 6 and selection is
automatically determined
by the Access Point.
F. Data Rate:
Graphi-
cally displays the
statistics of data trans-
mitted and received.
:
The Service Set
E. Link Quality /
Signal Strength:
Displays the wireless
signal strength for the
DWL-120+ wireless
connection to the
access point.