Table of Contents
Advertisement
Available languages
Available languages
Switching the video signal type (TV FORMAT)
TV FORMAT NTSC
Switch the video signal type of HDMI output so that it matches to the format of your TV.
Since the unit automatically selects the video signal type so that it matches to the TV, it
is unnecessary to change the setting normally. Change the setting only when images
on the TV screen do not appear correctly.
Settings
NTSC, PAL
Default
U.S.A. model: NTSC
Other models: PAL
Restoring the default settings (INIT)
INIT
CANCEL
Restores the default settings for the unit.
Choices
ALL
Restores the default settings for the unit.
CANCEL
Does not perform an initialization.
Updating the firmware (UPDATE)
UPDATE
USB
New firmware that provides additional features or product improvements will be
released as needed. Updates can be downloaded from our website. If the unit is
connected to the Internet, you can download the firmware via the network. For details,
refer to the information supplied with updates.
■
Firmware update procedure
Do not perform this procedure unless firmware update is necessary. Also, make sure
you read the information supplied with updates before updating the firmware.
1
Press STRAIGHT repeatedly to select "USB" or "NETWORK" and press INFO to
start firmware update.
Choices
USB
Update the firmware using a USB memory device.
NETWORK
Update the firmware via the network.
• If the unit detects newer firmware over the network, the envelope icon (p) will appear in the "Network
Update" screen. In this case, you can also update the unit's firmware by following the procedure in
"Updating the unit's firmware" (p.85).
Checking the firmware version (VERSION)
VERSION
xx.xx
Check the version of firmware currently installed on the unit.
• You can also check the firmware version in "Network Update" (p.79) in the "Setup" menu.
CONFIGURATIONS ➤ Configuring the system settings (ADVANCED SETUP menu)
81
En
Advertisement
Chapters
Table of Contents
Troubleshooting
