To disconnect the device from the power source the mains adaptor must be removed from the power socket. For this reason the device must be placed in a position where a constant unobstructed access to the STAIRVILLE • PAR 56/64 10 MM BLACK/SILVER FLOOR RGB...
Page 3
power socket is assured, thus in an emergency situation you are able to immediately pull out the mains adaptor. To eliminate the risk of fire you must completely disconnect the mains adaptor from the power socket after the device has been used. Always grasp the mains adaptor by the plug.
Page 4
The fade time may be selected by setting dip switches 1 to 9. The time is added. 1-9 OFF time 2.5 s 7.5 s 10 s 15 s 20 s 40 s 80 s 160 s 640 s STAIRVILLE • PAR 56/64 10 MM BLACK/SILVER FLOOR RGB...
Manual mode Set dip switches 10, 11 and 12 to ON. The unit is in manual mode then. In this mode you can set the colour brightness according to the following table: DIP 1, 2 GREEN DIP 3, 4 OFF/OFF OFF/ON ON/OFF ON/ON...
Page 6
128-159 = auto mix 160-191 = 3 colour chase 192-223 = 7 colour chase 224-255 = sound action 8-255 = macro 16-255 = strobe 31 steps of 16 steps of macro speed STAIRVILLE • PAR 56/64 10 MM BLACK/SILVER FLOOR RGB...
Fixture cleaning The cleaning of the fixtures must be carried out periodically to optimise light output. Cleaning frequency depends on the environment in which the fixture operates: a damp, smoky or particularly dirty surrounding can increase the accumulation of dirt. Clean with soft cloth using normal glass cleaning fluid.
Need help?
Do you have a question about the PAR 56 and is the answer not in the manual?
Questions and answers