Table of contents Table of contents General notes............................... 4 1.1 Further information........................... 5 1.2 Symbols and signal words....................... 6 Safety instructions............................. 8 Features............................... 12 Installation and operation........................13 Technical specifications........................16 Cleaning............................... 17 Protecting the environment......................18 LED Flood 50W...
General notes General notes This manual contains important instructions for the safe operation of the unit. Read and follow the safety instructions and all other instructions. Keep the manual for future reference. Make sure that it is available to all those using the device. If you sell the unit please make sure that the buyer also receives this manual.
Our online guides provide detailed information on technical basics Online guides and terms. Personal consultation For personal consultation please contact our technical hotline. If you have any problems with the device the Service customer service will gladly assist you. LED Flood 50W...
General notes 1.2 Symbols and signal words In this section you will find an overview of the meaning of symbols and signal words that are used in this manual. Signal word Meaning DANGER! This combination of symbol and signal word indicates an immediate dangerous situation that will result in death or serious injury if it is not avoided.
Page 7
General notes Warning signs Type of danger Warning – high-voltage. Warning – suspended load. Warning – danger zone. LED Flood 50W...
Safety instructions Safety instructions Intended use This device is intended to be used as an electronic illumination effect using LED technics. Use the device only as described in this user manual. Any other use or use under other operating conditions is considered to be improper and may result in personal injury or property damage. No liability will be assumed for damages resulting from improper use.
Page 9
Do not use the device if covers, protectors or optical components are missing or damaged. DANGER! Electric shock caused by short-circuit Do not modify the mains cable or the plug. Failure to do so could result in electric shock/death or fire. If in doubt, seek advice from a registered electrician. LED Flood 50W...
Page 10
Safety instructions WARNING! Eye damage caused by high light intensity Never look directly into the light source. NOTICE! Risk of fire Do not cover the device nor any ventilation slots. Do not place the device near any direct heat source. Keep the device away from naked flames. LED floodlight...
Page 11
In case a thunderstorm is coming up or you're not going to use the device for a longer period of time, disconnect it from the power grid to reduce the risk of elec‐ tric shock and fire. LED Flood 50W...
Features Features The LED floodlight is specially suited for professional lighting tasks. The high-quality reflector provides an even illumination and maximum luminous efficiency. Special features of the device: Robust housing High luminous power at low power consumption Outdoor application, IP65 LED floodlight...
Risk of injury caused by falling objects Make sure that the installation complies with the standards and rules that apply in your country. Always secure the device with a secondary safety attachment, such as a safety cable or a safety chain. LED Flood 50W...
Page 14
Installation and operation NOTICE! Risk of overheating Always ensure sufficient ventilation. The ambient temperature must always be below 40 °C (104 °F). NOTICE! Use of stands When mounting the device onto a stand, ensure that the stand is in a safe and stable position and that the weight of the device does not exceed the maximum permissible load capacity of the stand.
Page 15
The safety cable must be attached to the bracket. Please note that this device must not be connected to a dimmer. Establish all connections as long as the unit is switched off. Use the shortest possible high- quality cables for all connections. LED Flood 50W...
Technical specifications Technical specifications High power, white 50 W Dispersion angle 120 ° Operating voltage supply AC 230 V , 50 Hz Power consumption 55 W Dimensions (W × D × H, without bracket) 290 mm × 235 mm × 148 mm Protection class IP65 Weight...
The frequency of cleaning depends on the operating environment: wet, smoky or particularly dirty surroundings can cause more accumulation of dirt on the optics of the device. Clean with a soft cloth using our lamp and lens cleaner (item no. 280122). Always dry the parts carefully. LED Flood 50W...
Protecting the environment Protecting the environment Disposal of the packaging mate‐ rial For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of. Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling.
Need help?
Do you have a question about the LED Flood 50W and is the answer not in the manual?
Questions and answers