Precautions In Sales Promotion; Handling Instructions; Caution On Name Plate; Precautions On Usage - Hitachi G 12SE2 Technical Data And Service Manual

Hide thumbs Also See for G 12SE2:

Table of Contents

7. PRECAUTIONS IN SALES PROMOTION

In the interest of promoting the safest and most efficient use of the Models G 12SE2 and G 13SE2 Disc Grinders

by all of our customers, it is very important that at the time of sale, the salesperson carefully ensures that the

buyer seriously recognizes the importance of the contents of the Handling Instructions, and fully understands the

meaning of the precautions listed on the Name Plate or Caution Plate attached to each tool.

Although every effort is made in each step of design, manufacture and inspection to provide protection against

safety hazards, the dangers inherent in the use of any electric power tool cannot be completely eliminated.

Accordingly, general precautions and suggestions for the use of electric power tools, and specific precautions and

suggestions for the use of the disc grinders are listed in the Handling Instructions to enhance the safe and efficient

use of the tool by the customer. Salespersons must be thoroughly familiar with the contents of the Handling

Instructions to be able to offer appropriate guidance to the customer during sales promotion.

Each tool is provided with a Name Plate which contains the following basic safety precautions in the use of the

tool.

(1) For European countries

(2) For New Zealand and Australia

CAUTION

Read thoroughly HANDLING INSTRUCTIONS before use.

(3) For U.S.A. and Canada

Never press the pushing button while the depressed-center wheel is rotating.

If the pushing button is pressed while the depressed-center wheel is rotating, the spindle will stop immediately.

In such a case, there is a danger that the wheel nut may be loosened so that the depressed-center wheel flies off

unexpectedly to cause possible serious injury.

--- 6 ---

G 12SE2: 13,300

G 13SE2: 12,000

Table of Contents

G 13se2