Secondary Chassis Frame Removal; Plasma Display Panel Removal - Philips BJ3.0E Service Manual

Secondary Chassis Frame Removal

2 2
1
1
2 2
Figure 4-21 Secondary chassis frame removal
1. Remove the T25 tapping screws [1].
2. Remove the T10 parker screws [2].
3. Remove one T20 tapping screw [3].
4. Disconnect one connector [4] at the bottom of the Display
Supply Panel.
5. Disconnect two cables [5] at the top of the Platform Supply
Panel.
Mechanical Instructions
Figure 4-20 Primary chassis frame lift
5
2 2
1
6 4
3
1
2 2
G_15960_106.eps
080306
BJ3.0E PA

Plasma Display Panel Removal

Figure 4-22 Plasma Display Panel removal
Now the PDP and the glass plate can be removed. Before
sending the PDP for repair, remove the Display Supply Panel
(only for FHP panels) and the LVDS cable. The glass plate can
be removed after lifting the surrounding metal frame [1].
4. EN 15
G_15960_105.eps
070306
2 1
G_15960_107.eps
070306