Advertisement
Quick Links
Download this manual
See also:
Quick Manual
Advertisement
Related Manuals for Abus TVIP81000
Summary of Contents for Abus TVIP81000
- Page 1 TVIP81000 / 81100 TVIP82000 / 82100 TVAC31200 / TVAC31210 / TVAC31220 TVAC31230 / TVAC31240 Quick Guide ..........Version 05/2013...
- Page 2 English 1. Information before installation The triangular warning symbol indicates The triangular high voltage symbol is used to important notes in this user guide which must warn of the risk of injury or health hazards be observed. (e.g. caused by electric shock). Please use the power supply unit included with the Do not drop the dome and ensure it cannot be scope of delivery.
-
Page 3: Scope Of Delivery
English 2. Scope of delivery 2.1 Indoor domes Day/night PTZ network dome Power supply unit Adapter panel Cover panel camera with 20x zoom Quick guide Gloves Installation material 2.2 Outdoor domes Day/night PTZ network outdoor Power supply unit Adapter Teflon tape dome camera with 20x zoom Quick guide Gloves... -
Page 4: Description Of The Connections
English 3. Description of the connections Description Network cable Audio Alarm output Alarm input RS-485 Power supply Slot SD card (not used) Power LED Please note that the connections for TVIP81000/TVIP81100/TVIP82000/TVIP82100 are all identical. -
Page 5: Installation
English 4. Installation Before starting: Check the scope of delivery and ascertain that the Speed Dome is not damaged. Never hold the Speed Dome by its waterproof cable, as otherwise its water retardant properties could be compromised. 4.1 Installation on the wall 1. - Page 6 English 4. Drill four holes in the wall to match the mount, and push the straddling dowels into the wall. 5. Attach the seal between the wall and mount using the straddling dowels to help you. 6. Install the mount using the washer and the nut. Washer and nut Straddling dowel The straddling dowels must be used for stone walls.
- Page 7 English Fastening hook Fastening screw Label...
- Page 8 English 4.2 Installation suspended from the ceiling Before starting: The following points are prerequisites for installation: At least 250 mm must be free above the ceiling. The ceiling must be at least 5 mm and up to 40 mm in thickness. The ceiling must be strong enough to bear more than 4 times the weight of the Speed Dome and its accessories.
- Page 9 English 6. Installing the dome 6.1 Undo both screws on the side of the ceiling mount and place the safety mounts in position as shown. Safety mount Safety mount 6.2 Place the Speed Dome in the hole drilled in the ceiling. 6.3 Tighten both screws in the safety mounts.
- Page 10 English 4.3 Installation in the ceiling Before starting: The following points are prerequisites for installation: The ceiling must be at least 5 mm and up to 40 mm in thickness. The ceiling must be strong enough to bear more than 4 times the weight of the Speed Dome and its accessories.
- Page 11 English 3. Installation Before starting: Wood screws (self-tapping) can be used for wooden walls. For stone walls, drill four holes with a diameter of 5 mm in the ceiling to match the intervals between the holes in the mounting plate. Then fit four suitable dowels. 3.1 Turn the dome anti-clockwise to open it and remove it.
-
Page 12: Installing The Mounts
English 5. Installing the mounts 5.1 Wall mount installation (TVAC31200/TVAC31210) 5.1.1 Dimensions TVAC31200 TVAC31210... - Page 13 English 5.1.2 Installation Before starting: The wall must be thick enough to allow the straddling dowels to be fitted. Make sure that the wall is strong enough to bear more than 8 times the weight of the Speed Dome and its mount. 1.
- Page 14 English 5.2 Corner mount installation (TVAC31220) 5.2.1 Dimensions TVAC31220 5.2.2 Installation Before starting: The wall must be thick enough to allow the straddling dowels to be fitted. Make sure that the wall is strong enough to bear more than 8 times the weight of the Speed Dome and its mount.
- Page 15 English Washer and nut 5. Attach the seal between the corner mount and the wall mount 6. Screw the wall mount into place using the four threaded screws and spring washer to help you. 7. Continue with installation of the Speed Dome. Further information on installing the Speed Dome can be found in section 4.
- Page 16 English 5.3 Mast mount installation (TVAC31230) 5.3.1 Dimensions TVAC3130 5.3.2 Installation Before starting: The diameter of the stainless steel clamps must be the same as the diameter of the mast. Make sure that the mast is strong enough to bear more than 8 times the weight of the Speed Dome and its mount.
- Page 17 English 3. Pull the connecting cable through the middle hole in the mast mount. 4. Secure the stainless steel clamps by tightening the screws. 5. Attach the seal between the mast mount and the wall mount. 6. Screw the wall mount into place using the four threaded screws and spring washer to help you. 7.
- Page 18 English 5.4 Wall mount installation incl. power supply unit installation (TVAC31240) 5.4.1 Dimensions TVAC31240 5.4.2 Installation Before starting: The wall must be thick enough to allow the straddling dowels to be fitted. Make sure that the wall is strong enough to bear more than 8 times the weight of the Speed Dome and its mount.
- Page 19 English 3. Install the wall mount. 4. Guide all wires through the installation box for the power supply unit and connect the Speed Dome accordingly. Further information on installing the Speed Dome can be found in section 4. Detailed instructions can be found as a PDF document on the enclosed CD.
Need help?
Do you have a question about the TVIP81000 and is the answer not in the manual?
Questions and answers