Table of Contents
Advertisement
Read all of these instructions. Use them to install your camera and have them available for its
lifetime. If you have any problems, contact Ademco Technical Support. Note that not all cameras
have all of the features described in this manual. Refer to the table below for the features of
individual cameras. All cameras are fitted with a Direct Drive (DD) and Video Drive auto Iris (AI)
lens connector, have adjustable back focus and accept C and CS lenses.
Option
Mono
Color
Resolution (TVL)
Sensitivity (lux @ f1.2)
CCD Sensor size
Scanning system PAL
Scanning system NTSC
Sony HyperHAD CCD
Digital Signal Processing (DSP)
Adjustable Gamma (0.45 and 1.0)
Automatic Gain Control (AGC)
AGC on/off
Backlight Compensation (BLC) on/off
BLC selectable windows
Peak White Inversion
Sharpness on/off
Discrete Cosine Transfer on/off
Twisted-pair output
Separated Y/C output
Front panel LED on/off
Line lock with phase adjust (AC only)
Direct/Video Drive Auto Iris connector
Supply
20 - 29 VAC 60Hz or 11 - 28 VDC
98 - 260 VAC 50/60Hz
1 x Mounting Bolt.
1x Twisted pair connector (blue removeable connector fitted to the back of the camera).
4
INTRODUCTION
570
570
570 480
480
480
0.1 0.1 0.1 0.7 0.7 0.7
1/3"
1/3"
1/3" 1/3"
1/3"
1/3"
8
8
8
8
8
8
PACKING LIST
Advertisement
Table of Contents
